Fabri-Tac™ FAQ

Want to learn more about Beacon Fabri-Tac™ and how you can incorporate it into your DIY projects?  Then look no further!  Fabri-Tac™ is a premium quality adhesive and has been a favorite among professional designers for decades.  It is also great for practical use; keep it handy in case you need to quickly hem or repair your clothes!  Fabri-Tac™ has a wide range of uses and we hope this blog helps answer any questions you may have.  Be sure to check out the video below for some Fabri-Tac™ Tips and Tricks!

What materials does Fabri-Tac™ bond to?
Fabrics, canvas, lace, trims, leather, ribbons, wood, sequins, paper, glass etc.

Is Fabri-Tac™ machine washable?
Yes!  We recommend waiting 24 hours for the glue to dry before washing.

What if the bonded surface comes apart in the wash?
It could be that not enough Fabri-Tac™ was applied.  We also recommend pre-washing your fabric before applying Fabri-Tac™.

What if the edges curl after washing?
Make sure you apply Fabri-Tac™ to the edges of the fabric.

Is Fabri-Tac™ recommended for dry cleaning?
Fabri-Tac™ is not recommended for dry cleaning except when you wish to remove the glue from fabric.  You might have to dry clean the item more than once to thoroughly remove the glue.

Is Fabri-Tac™ toxic?
Yes, but it is no longer toxic after it is COMPLETELY dry.

Is Fabri-Tac™ flammable?
Fabri-Tac™ is flammable only when wet and should never be used near an open flame (no smoking!) and should be used with proper ventilation.

What should I do to prevent my Fabri-Tac™ from bubbling?
You can prevent bubbling by inserting a straight pin into the bottle. (Please refer to the above video on how to do this.)

How do I prevent my Fabri-Tac™ from stringing?
To prevent your Fabri-Tac™ from stringing, you can rub some Vaseline around the tip of the bottle. (Please refer to the above video on how to do this.)

What should I do if my Fabri-Tac™ is starting to thicken up?
If your Fabri-Tac™ is starting to become thick, you can thin it by adding 1/2 tsp of acetone or clear nail polish remover and then mix. (Please refer to the above video on how to do this.)

What should I do if my Fabri-Tac™ is becoming thin?
Don’t throw away the bottle!  If your Fabri-Tac™ is starting to become thin, you can put it in the refrigerator to thicken it.

Can Fabri-Tac™ be used to attach patches to fabric?
Yes!  If the patch has an iron-on backing, score it with a sharp tool and then apply the Fabri-Tac™.

Can Fabri-Tac™ be used to make a no-sew face mask?
Yes!  Fabri-Tac™ is a great glue to use as an alternative for those who can’t sew or choose not to!  Check out our no-sew face mask tutorial HERE and our no-sew face mask FAQs post HERE.

What if the fabric becomes stiff?
Too much Fabri-Tac™ was applied.

How do I remove Fabri-Tac™ from fabric?
The best way to remove Fabri-Tac™ from most fabrics is by dry cleaning.  However, sometimes that is not possible.  You may use the following method:

Supplies Needed
1. Spoon or butter knife
2. Acetone
3. Clean rag

Before Starting
1. ALWAYS test first on a small, unseen area of the item to ensure that the acetone will not discolor or adversely affect the fabric.
2. NEVER use a dining room table or any finished surface as a work area as acetone will strip off the finish.  Cover your work area with plastic or newspaper.

Be Careful
1. Acetone is a FLAMMABLE solvent and should always be kept away from heat, open flames, lighted cigarettes and other sources of ignition.
2. Keep acetone out of reach from children.
3. Wear eye protection.
4. Work in a well-ventilated area.

Instructions:

Step 1: Remove as much of the dried Fabri-Tac™ as you can by using your fingernail, a spoon or a butter knife.
Step 2: Wet a small portion of the rag with acetone.  Slowly rub the wet rag directly onto the adhesive to be removed.  Wet and turn the rag often to keep it from drying out.
Step 3: The wet rag will soften and liquefy the glue.  This will be a slow process.  Gently peel off any blobs of glue you see and discard.

DO NOT DIP THE GARMENT OR FABRIC INTO THE ACETONE!  This will make the glue more difficult to remove and may permanently damage the fabric!

Some individuals may be sensitive to acetone’s smell.  If you or anyone near you dislikes the smell, immediately discontinue the removal process.

Other Fabri-Tac™ Tips and Tricks:

  • Fabri-Tac™ is fast grabbing, quick drying, permanent, crystal clear, flexible AND it won’t stain or soak into fabrics.
  • Always read directions carefully for successful application.
  • Keep bottle covered when not in use, to prevent Fabri-Tac™ from evaporating.  Lose the little red tip?  Cover the bottle opening with plastic wrap and replace cap.
  • Since Fabri-Tac™ is fast drying, please do not delay in bonding surfaces.
  • Always pre-wash fabrics to remove any possible sizing before applying Fabri-Tac™.
  • Avoid spreading glue too thinly as it may then dry too quickly.

Have any other questions about Fabri-Tac™?  Feel free to reach out and we will be sure to get back to you!

Get 20% off Fabri-Tac™ using code FABRITAC20 at checkout.  Limited time only.  Exclusions apply.

Fabri-Tac FAQ

Follow us on social media:

Instagram | Facebook | YouTube | Pinterest

This video was produced by Craft Box Girls.